perma PRO MP-6 & PRO C MP-6

The perma PRO MP-6 (Multi-Point 6) and perma PRO C MP-6 are automatic, multi-point lubrication systems with unique characteristics.  The perma PRO MP-6 (Multi-Point 6) and perma PRO C MP-6 are fitted with a 500cc canister of factory filled grease which is distributed evenly across either 2, 3, 4, 5 or 6 individual lubrication points.

The PRO MP-6 system is a stand alone, battery powered system.  Meanwhile, the PRO C MP-6 is a PLC controlled system.  The PRO C MP-6 (C for Control) is primarily designed for machines which stop for extended durations of time, during which time the lubrication system goes into a "waiting mode" and does not discharge again until the machine recommences operation.  In addition to this feature, the system status can be monitored via a PLC-control system (eg. warning lights).

Unlike traditional progressive divider-block style grease distributors there is negligible grease pressure drop across the MP6 unit.  To achieve this the MP6 utilises a rotating distributor which is programmed and controlled by the perma Pro unit. 

If all six outlets are not required the redundant outlets are simply bypassed by the rotating distributor.  In the event that a grease blockage occurs in one of the lines the perma Pro lubricator will identify that there is a problem by activating a flashing red LED and identifying the error (and the relevant line) on the LCD display.  Meanwhile, the remainder of the points will continue to be lubricated.

The pressure output from each outlet of the MP6 is 25 bar which allows grease lines up to 5 meters in length to be installed from each of the six outlets.

Performance Features and Benefits:

• Intelligent lubrication of up to six points
• Line blockages are clearly identified whilst the remaining lubrication points continue to be greased
• 25 bar pressure output allows the flexibility of grease lines up to 5 meters in length
• Can be programmed to deliver the full volume of grease at multiple time settings up to 24 months

Notes:

• Lubrication systems should be mounted in IP 66 cabinets for outdoor operation or in indoor environments where high levels of dirt and water are anticipated.

Example Installation 1 - perma PRO MP-6 installed on a conveyor servicing 4-points

Example Installation 2 - perma PRO MP-6 servicing 4-points

www.perma-tec.com

  perma PRO Operators Guide

  perma PRO Control Operators Guide

  perma PRO MP-6 & PRO C MP-6 (extract from 3rd Ed Catalogue 2011)